Rome Resources PLC - High-Grade Tin Intercepts at Kalayi
RNS Number : 3511Y
Rome Resources PLC
25 February 2025
This announcement contains inside information for the purposes of Regulation 11 of the
Market Abuse (Amendment) (EU Exit) Regulations 2019/310. With the publication of this
announcement via a Regulatory Information Service, this inside information is now
considered to be in the public domain.
25 February 2025
Rome Resources Plc
("Rome" or the "Company")
High-Grade Tin Intercepts at Kalayi - Drilling Confirms Depth Potential
Rome Resources Plc (AIM: RMR), the DRC-focused tin explorer, announces further assay results
from two diamond core drill holes at its Kalayi tin prospect located in North Kivu, the Democratic
Republic of Congo (the "DRC"). These results confirm the presence of high-grade tin mineralisation
across multiple sub-parallel ore shoots validating the Company's geological model and reinforcing
the potential of tin as the Company's drilling campaign moves closer to the interpreted granitic
source.
The Company remains focused on defining a maiden inferred mineral resource estimate at Kalayi
on its Bisie North Project, with drilling covering only 30% of the identified 2,000m tin-in-soil
anomaly. Mineralisation has been confirmed from surface, remaining open at depths beyond
250m, with visible cassiterite observed in the deepest hole to date (~ 220m below surface).
Kalayi Highlights: Expanding Potential with High-Grade Tin
· KBDD015:3.3m at 1.77% Sn from 96.85m; 5.7m at 1.35% Sn from 147.90m (including
2.85m at 1.98% Sn); and
· KBDD016:9.5m at 0.60% Sn from 126.45m (including 1.7m at 1.61% Sn)
Key Takeaways:
·
·
·
·
·
·
Strong mineralisation continuity: Assay results confirm a pinch-and-swell system, with
tin mineralisation remaining open beyond 250m depth.
Final drill holes underway: Two additional shallower holes will complete the current drill
programme.
Assay results from two holes remain: Assay results from the southernmost hole and the
deepest drilled to date at Kalayi are expected to show continuity of mineralisation on strike
and at depth.
Geological similarity to Alphamin: The system continues to show characteristics similar
to Alphamin's Mpama South deposit, with potential for deeper high-grade mineralised
zones.
Depth extension strengthens resource potential: Tin mineralisation intercepted 80m
below KBDD015 and KBDD016 is expected to materially enhance the resource potential,
significantly expanding the known mineralised system.
Tin market strength: With tin prices nearing ~US$34,000/t, these intercepts highlight the
potential for economic mineralisation, particularly as drilling extends deeper.
The drill rig at Kalayi was mobilised to Mont Agoma to improve productivity where adverse
drilling conditions have resulted in delays to completing the initial Mont Agoma programme. The
rig will be returned to Kalayi in due course to complete the remaining holes, ensuring
the partial extent of the tin system is captured in the upcoming maiden inferred resource
estimate.
Exploration Update & Forward Plan
·
·
·
·
·
Rome remains fully funded for its current programme following its £4.2 million strategic
investment from Stanvic Mining, enabling an accelerated exploration programme in 2025.
Assay results from MADD018 at Mont Agoma, which intersected over 100m of visible
copper mineralisation, are expected to be available shortly. This will be a critical test for the
potential scale of copper mineralisation associated with the 2,000m copper in soil
anomaly.
Drilling continues at both Kalayi and Mont Agoma, with a focus on extending high-grade tin
zones and advancing towards a maiden inferred mineral resource estimate.
Ongoing deeper drilling is testing the mineralisation zonation model, seen in world-class tin
mines such as Alphamin's Mpama deposits and San Rafael in Peru, where grades have
strengthened significantly at depth.
Drill results at Kalayi confirm economic-grade tin mineralisation and support the potential
for open-pit development, with mineralisation now confirmed across multiple zones.
Operations remain unaffected by unrest in Goma and Bukavu. The Company has
proactively relocated its logistical base to Kisangani, ensuring full operational capacity and
continuity of exploration. The remote proximity of Rome's projects as well as the limited
infrastructure surrounding the projects reduces the Company's exposure to regional unrest.
Paul Barrett, Chief Executive Officer of Rome Resources Plc, commented:
"With tin trading at near-record levels of ~US$34,000/t, our latest results further reinforce Kalayi's
economic potential. These new results build on our confidence in the project's growing scale and the
continuity of high-grade tin mineralisation at depth. We now have clear evidence of a strong system
extending across multiple zones, improving widths and grades as we drill deeper towards the granite
source."
"With over 4,135m drilled to date, we are moving rapidly towards defining our maiden inferred
mineral resource estimate, which will be a major step in demonstrating the full potential of this
emerging tin asset. The combination of high tin grades, growing scale, and Rome's strategic
positioning within one of the world's most prospective tin belts places us in a strong position to unlock
further shareholder value."
Discussion of Results at Kalayi
Results for KBDD015 and KBDD016 are summarised in Table 1 and shown in Figures 1 and 2.
Notably, KBDD018, which targeted the mineralised zone 80m below KBDD016 (as shown in
section in Figure 2) has confirmed the continuation of tin mineralisation at depths exceeding
250m below surface. This is a significant finding, as the bulk of the resource at neighbouring
Mpama South is below these levels. Similarly, grades and widths at Kalayi may strengthen as
drilling advances toward the interpreted underlying granitic source.
The confirmation of tin mineralisation 80m below KBDD015 and KBDD016 significantly expands
the known mineralised system at Kalayi. This depth extension is expected to materially
enhance the resource potential, reinforcing the geological model and supporting further growth as
drilling continues.
Both KBDD015 and KBDD016 reported narrow, high-grade intercepts exceeding 3% tin within the
broader zone of mineralisation, reinforcing the potential for a nearby significant mineralised
system at Kalayi. The system remains open for further drilling, with additional results expected to
provide greater insight into the deposit's full scale.
Samples from remaining holes, KBDD017A and KBDD018 will be sent from Kisangani to
Lubumbashi for sample preparation prior to onward transportation to Johannesburg. Results for
the bulk of the Kalayi drilling programme are expected in the first quarter of 2025 contributing to
theproposed maideninferred mineral resource estimate.
Figure 1. Completed and Planned Holes at Kalayi on the 2,000m tin in soil anomaly
Figure 2: Section with Drill Intercepts across KBDD015 and KBDD016
Table 1: Significant Tin Intercepts at Kalayi (0.1% cut-off grade for Sn; 3m internal
dilution)
BHID
From
To
Width Sn%
96,85 100,15
3,30
1,77
KBDD015
147,90 153,00
5,10
1,35
126,45 136,00
9,55
0,60
KBDD016
140,90 141,50
0,60
1,28
For further information please contact:
Rome Resources Plc
Paul Barrett, Chief Executive Officer
Mark Gasson, Chief Operating Officer
Tel. +44 (0)20 3143 6748
Allenby Capital Limited (Nominated Adviser and Joint Broker)
John Depasquale / Vivek Bhardwaj / Lauren Wright (Corporate Finance)
Stefano Aquilino / Joscelin Pinnington (Sales & Corporate Broking)
Tel. +44 (0)20 3328 5656
OAK Securities (Joint Broker)
Jerry Keen, Head of Corporate Broking (jerry.keen@oak-securities.com)
Henry Clarke, Head of Sales (henry.clarke@oak-securities.com)
Tel. +44 (0)20 3973 3678
Camarco (Financial PR)
Emily Hall / Gordon Poole / Sam Morris
Tel. +44 (0) 20 3757 4980
OAK Securities is a trading name of Merlin Partners LLP. Merlin Partners LLP is authorised and
regulated by the Financial Conduct Authority (Reference Number: 449191). Merlin Partners LLP is
registered in England and Wales (Registered Partnership Number: OC317265).
Qualified Person Statement
Dr Deon Vermaakt is a consultant of Rome Resources plc, a qualified geologist and a registered
Professional Natural Scientist (Geological Science) with the South African Council for Natural
Scientific Professions (SACNASP Reg. No. 400074/03). Dr Vermaakt is a qualified person (QP)
under NI 43-101 and as defined by the AIM Note for Mining, Oil and Gas Companies and has
reviewed and approved the scientific and technical information contained in this news release.
Dr Vermaakt is satisfied that the results returned for the QAQC samples for holes KBDD015 and
KBDD0016 which were inserted at regular intervals throughout the samples and reported grades
which were well within acceptable ranges as per industry standard.
The one sample batch consisted of 193 samples, of these 25 was QAQC samples. Five duplicates
were inserted, 12 CRM's and 8 Blank samples were inserted, all returned acceptable industry
results.
Furthermore,Dr Vermaakt reviews all the sampling procedures on an on-going basis. The
handheld Niton XRF is frequently checked and calibrated to ensure accurate analysis and
measurements.
Glossary
Diamond
Core
Drill:
Diamond core drilling uses a diamond cutting bit, which rotates
at the end of a steel rod (tube) allowing for a solid column of rock
to be recovered from the tube at the surface
en echelon:
Parallel or subparallel, closely-spaced, overlapping, or step-like
structural features in rock
Km:
Kilometres (Metric)
M:
Metres (Metric)
Niton XRF:
A portable x-ray fluorescence analyser
Gossan:
A generally hard oxidised surface zone of an ore body
Sn:
The chemical element for tin
Ore Shoot:
An ore shoot is a mineralised mass that is deposited in veins
within a planar channel or lode, found in a shear or fault zone,
fissure or lithologic boundary
This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct
Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of
this information may apply. For further information, please contact rns@lseg.com or visit www.rns.com.
RNS may use your IP address to confirm compliance with the terms and conditions, to analyse how you engage with the information
contained in this communication, and to share such analysis on an anonymised basis with others as part of our commercial services.
For further information about how RNS and the London Stock Exchange use the personal data you provide us, please see our Privacy
Policy.
END
MSCSEUSWIEISESE
Share your feedback
Discover